Accuracy for electronic Granulator How important is good or bad? In recent years, manufacturers of electronic granulator use this to measure the quality of the granulator, and as the "gold standard" for manufacturing the granulator, they keep improving.

The amount of each bottle of sugar coating, tablet and capsule is determined through continuous clinical trials, practice and data. Either how much you want to put in this bottle, or how much you want to put in it. Especially for pharmaceutical factories with an annual output of hundreds of millions of tons, the cost difference caused by different accuracy is a world of difference. Of course, more importantly, it will have a negative impact on consumers' minds.

On the other hand, the accuracy of the granulator is not only achieved through production, but also the "stability" of the granulator in long-term production practice. It is also the core standard for evaluating the quality of the granulator.

In short, the two major standards of the granulator: accuracy and stability.

The question is how to improve the accuracy and stability of the electronic granulator?

First, this must be determined by specific statistics. What numbers bring is more intuitive.

Secondly, figures alone are not enough. It is also necessary to continuously record and test the accuracy of the number of particles, and conduct statistics and analysis of reasonable data sources.

However, you should know that this workload is not unusually large, and the electronic granulator came into being

In addition, ensure the accuracy of several grains. Three level vibration feeder, electrical control unit, multi-channel cylinder material door control module, multi-channel particle counting sensor module... Mitte has practiced that only when each affected link is strictly controlled and managed can the accuracy and stability of equipment be guaranteed for a long time and in any environment.