Electronics Granulator How to deal with the problem that the material gravity affects the unloading bin of?
In view of the problems existing in the blanking bin of the electronic granulator affected by material gravity, it can be considered to divide the bin into constant weight bin and non constant weight bin. In this way, the influence of material gravity on the respective conditions of materials in the oscillating plate can be effectively handled. As for the problem that it takes too long for the material to fall from the recall baffle to the bottle, it should consider adding another level of recall baffle to deal with the following problems. It is necessary to be able to drop the materials from the recall baffle to the bottle time dividend, shorten the bottle loading time, and close the recall baffle when the bottle is being loaded. The counter works continuously, so that two actions can be ended, the blanking and bottling of the previous bottle and the counting of the next bottle, and the production speed is improved. Secondly, it can deal with the problem of electrostatic adsorption materials.
The granulator is mainly used for small batch quantitative packaging of capsules and tablets, and is very suitable for small and medium-sized batch testing and production of pharmaceutical factories, scientific research institutions and laboratories. It is applicable to items of different scales and can distinguish fragments from fragments. At the same time, materials can be taken out in small piles to avoid capacity waste. There is no need to divide into one-way channels or separate. The single-layer oscillating disk feeding and integrated channel greatly improve the feeding density and production capacity, without high-speed gate, avoiding the risk of gate compression, requiring no cleanliness of compressed air, and compact size.
Now, although the application scope of the granulator is very wide, many people do not know how to operate correctly, and many details in the operation process are not clear. The correct operation can be divided into front operation, rear operation and rear operation. Before operation, the user shall check whether the glass turntable and oscillator are stopped; Check whether there are other sundries on the glass turntable and discharge chute; Adjust the particle opening size and the tracker; Adjust the riser height to determine the locator. After that, turn on the power supply and set the quantity parameters required for the production process. Please note that the rotary table and oscillator start slowly to check whether the particles slide smoothly. If all requirements are satisfied, it can run.
During operation, the emission of oscillating particles shall match the speed of the rotating disk during operation, and it shall be noted that no matter shall accumulate on the disk surface to avoid blocking the track. If there are too many materials, it is easy to overlap or block in the tracker, and the counting is inaccurate. The control signal of the automatic stop circuit is closed through the switch diode and relay preset, the count input is blocked, the count input terminal is grounded, and the feeding and counting are stopped.
In addition, users should pay attention to the operation of the granulator, otherwise normal operation may not be possible; When lifting the machine, do not hang the machine on the counter plate, otherwise the counter plate will become loose and damaged; It is necessary to adjust the snap ring on the counter to a suitable height. The bottom edge shall be kept at a proper distance from the particle head. Too low or too high will damage particles. It is necessary to thoroughly determine the material particles with uniform length, and there shall be no unqualified particles, otherwise the quantity and quality of particles will be affected.
Buying a high-quality granulator is the basic condition for users to ensure the counting quality. However, in the process of use, due to improper operation or error, some users will use it directly or pay no attention to details in the process of operation. It is necessary to operate the counting equipment correctly, and pay attention to some details in the operation process, so as to achieve outstanding counting function and ensure high-quality production.