Capping machine It is a kind of mechanical equipment, which is used to automatically tighten bottle caps, and is usually used in cosmetics, food, medicine and other industries. The workflow is as follows:

1. Prepare the articles and bottle caps that need to be screwed.

2. Adjust machine parameters, such as bottle cap diameter and height.

3. Put the items that need capping on the conveyor belt of the capping machine side by side, and let them enter the capping machine.

4. After the capping machine detects the object through the automatic sensor, it drives the workbench to fix the object after accurate calculation, and then starts capping.

5. The mechanical arm picks up the cap, transports it to the mouth of the bottle, and completes the cap screwing in a very short time.

6. After capping, the manipulator moves the covered container to the discharge port, and the turntable rotates at the same time. The next item starts capping just like the previous item.

It should be noted that when using Capping machine Pay attention to the safety operation rules, keep the machine and operating environment clean, and ensure the quality and safety of the machine and articles. At the same time, in order to prevent the bottle cap from falling into the articles, it is also necessary to carry out strict quality inspection and screening on the bottle cap.