Bottled tablet Several grains The method is as follows:

1. Put several bottles in a bright place, and check whether the mouth and inside of the bottle are clean and free of foreign matter.

2. Take out a certain amount of tablets (such as 10 tablets) and carefully check each tablet. If there are defective, fragmented or deteriorated tablets, they should be removed.

3. Put a piece of white paper on the plane, put the taken tablets on the paper, and use your fingers or a special tablet counting board to arrange the tablets into a neat row.

4. Weigh the neatly arranged tablets one by one from the top down until the quantity meets the requirements.

5. Transfer the weighed tablet into the bottle as needed, and take care not to block the mouth of the bottle.

6. Count the bottles that have been counted to ensure the quantity is correct, and remove debris and other residues with a brush.

7. Cap and seal the bottle, and indicate the name, specification, batch number, production date and other necessary information of the drug.

It should be noted that in the Several grains During the process, it is necessary to ensure the cleanness and hygiene of the environment and avoid the contamination of drugs by impurities such as dust and foreign matters. At the same time Several grains Before and during the process of counting, necessary disinfection and cleaning shall be carried out. In addition, if it is necessary to recheck the drugs, the recheck personnel should also check and confirm the results of several batches according to the regulations.