Electromagnetic induction aluminum foil sealing machine The use method of is as follows:

Please confirm that the power switch of the machine is off, and then insert the power cord plug into a standard socket with a current capacity of more than 10A. Turn on the power switch, and the nixie tube on the control panel shall display.

According to the area and material of the sealing material, set the value of unit production operation time through the time setting key.

1、 Debugging operation

1. Start sealing: press and release the start button on the sensor head to start sealing. The sealing is completed when the set sealing time is up and a prompt tone for the end of this work is given.

2. Inspection quality: carefully inspect whether the sealing quality meets the requirements. If the requirements have been met, normal sealing can be carried out; If the requirements are not met, if the sealing film and the diaphragm are not completely separated, or the sealing film and the diaphragm are separated but wrinkled, or the sealing melting is excessive, it means that the sealing time value is set improperly and needs to be adjusted again until the sealing is qualified.

2、 Operation precautions

1. Start interval: Do not start the equipment frequently, and the interval between two starts must be several minutes.

2. Do not touch: Do not touch the rotating spindle and conveyor in operation by hand or other means.

3. Exception handling: If there is any abnormal response during the operation of the equipment, stop the operation immediately, and start the machine after finding out the reason.

4. Shut down and clean up: Turn off the main power supply and clean the equipment and work area before going off duty.

Follow the above steps to effectively use Aluminum foil sealing machine Carry out sealing operation and ensure the normal operation of equipment and sealing quality.