Correct adjustment Capping machine , you can follow the steps below:

1. Ensure the stability of the machine: Capping machine Place it on a flat and stable workbench, and fix the screws to ensure that the machine will not shake or move.

2. Pressure adjustment: adjust the pressure of the capping machine according to the product requirements. Usually there is a pressure regulating button or knob on the machine, which can be adjusted to a suitable position as required. Note that the pressure should not be too large or too small, which may damage the product or equipment, and too small may cause the cover to fail to close securely.

3. Adjusting speed: adjust the working speed of the capping machine according to the recommendations of the product manufacturer. Some products need faster speed to ensure efficient production, while some products may need slower speed to maintain quality. There is usually a speed adjustment button or knob on the machine, and the appropriate speed can be selected as required.

4. Adjustment and positioning: ensure that the cap is placed on the bottle mouth accurately, and the positioning system of the machine can be adjusted. Some machines have automatic positioning function, which can automatically adjust the position, while some machines may need manual adjustment. Make sure that the cap is correctly placed on the bottle mouth to avoid tilting or loosening.

5. Test and adjustment: Before actual production, some tests can be carried out to check the quality and sealing of the cover. If it is found that the cover is not firmly fastened or there are other problems, the parameters of the capping machine can be adjusted properly until the desired effect is achieved.

It should be noted that different Capping machine There may be different operation methods and parameter adjustment methods. The above steps are only general guidance, and the specific operation should be carried out according to the actual situation and the machine description.