Parameter setting
 

The setting size of the silo gate, the setting of the oscillation frequency of the three-stage oscillation plate, the setting of the product length and small parameters, the setting of the expected number, the setting of the counting speed, and the setting of the separation speed will all affect the capsule Granulator Accuracy.
 

Environmental Science
 

The quality of compressed air will affect the counting accuracy. Compressed air with large water content has a great impact on the sensitivity of the actuator cylinder. Once the sensitivity of the cylinder drops, the accuracy of counting cannot be guaranteed.
 

human factor
 

The operator did not preheat the machine before starting according to the operating instructions. Or during the operation of the machine, the operator does not replenish the materials in the silo in time, which affects the separation state of materials on the oscillating plate, and will lead to inaccurate product counting.

Material factor
 

The set oscillation frequency of the three-stage oscillation plate for producing capsules, tablets and pills is completely different. Or when producing tablets and capsules, due to the large amount of dust carried by materials, the infrared ray is blocked by the accumulation of dust in the detection channel, so that the counting circuit cannot work normally.

Decrease of cylinder sensitivity
 

As the executive element of capsule counting machine, the reaction time directly affects the accuracy of counting. The main reasons for the decrease of cylinder sensitivity are: moisture content in compressed air, non cylinder specific grease, impurities entering the cylinder, wear and air leakage of cylinder seals, etc.